Basler Vision Technologies Sprint Series, User Manual

Page: 37 / 236

Physical Interface
Basler sprint Mono Cameras 27
2.2.2 Pin Assignments for the 6-pin Micro-miniature
Receptacle
The pin assignments for the 6-pin, micro-miniature, receptacle are as shown in Table 7.
1
Pins 1 and 2 are tied together inside of the camera.
2
Pins 5 and 6 are tied together inside of the camera.
2.2.3 Pin Numbering
Figure 13 shows the pin numbering for the connectors on the back of the camera for 2k and 4k
cameras. The pin numberings for 8k cameras are analogous.
Fig. 13: Pin Numbering (2k and 4k cameras; 8k cameras are analogous)
Pin Number Signal Name Direction Level Function
1, 2
1 +12 VDC Input +12 VDC (± 10%) Camera power
3, 4 --- --- --- Not used
5, 6
2
DC Gnd Input Ground DC ground
Table 7: Pin Assignments for the 6-Pin Receptacle
13 1
14 26
13
1
14
26
1
2
3
4
5
6
Not present
on all models
(see Table 4 and
Figure 12 on
page 24 )