basIP BR-AA14, User Manual

Page: 4 / 8

Wire all the necessary cables for
panel connection and switching
(for Ethernet, an exit button,
a lock, panel power, a door sensor,
a fire alarm, RS485, and Wiegand
interfaces) out of the wall within
the drawn rectangle.
7
Place the wall mount bracket
to the installation place on the
wall and fasten it with screws
through the mounting holes.
At the same time, pass all the
protruding from the wall wires
through the corresponding hole
in the bracket.
8
Cut out a rectangle of 80x40 mm
from foamed polyurethane or
rubber. In the rectangle, make
holes opposite the required
outgoing connectors on the
panel rear side.
9
80 mm
40 mm
Pass all wires through the made
earlier holes in the insulating
rectangle.
10