Materials
BASI Systems™ Spine Corrector is made with the finest custom manufactured materials. We use beech wood for
sturdiness, antibacterial vinyl to resist wear-and-tear and orthopedic cushioning for comfort. Then we x-ray the springs
to ensure their quality and safety. Your BASI Systems™ Spine Corrector is shipped to you in a special recyclable
container designed to be folded down or used for other things.
Care and Maintenance
BASI Systems™ Spine Corrector is designed with the highest quality materials to provide ergonomic integrity, comfort
and longevity. We recommend that you follow these guidelines to care for your equipment and use it safely.
Springs should be inspected weekly for gaps or kinks. If a gap or kink is found, discontinue use of the spring
immediately and replace it. Check that the spring hooks are working properly. It is recommended that all springs be
replaced after two years of use. Inspect and tighten the nuts, bolts and screws monthly. Upholstery can be cleaned
using the cloth provided or any soft cloth with warm water and soap. For deeper cleaning, use a soft bristled brush with
an alkaline-based cleanser and rinse with cold water and a sponge.
Contact Us!
The BASI Systems™ Spine Corrector is part of a family of products designed to inspire and enhance your Pilates
practice. We would love to hear from you. Please contact us with questions or stories!
www.basisystems.com / [email protected]
For North America Toll free 866 992 2742 / For Other Terri90 212 444 76 59
About BASI Systems™
BASI Pilates
®
is a leading Pilates education academy with a reputation for innovation, dedication and academic
excellence. BASI stands for Body Arts and Science International, which is the name of the academy and an affirmation
of its approach to Pilates studies. The mission of BASI Pilates
®
is to create and maintain professional standards for the
teaching of the Pilates Method and to preserve and perpetuate the gift of Pilates by educating teachers of the highest
caliber and providing equipment designed to have biomechanical and aesthetic integrity.
Attach F2 System™ Base
Press the button on the F2 System™ base and slide it into the Spine Corrector
port. Release the button and rotate slightly until it catches one of the angles
inside the mechanism and clicks securely into place.
Attach F2 System™ Handle
Loosen the knob on the F2 System™ base and pull the knob as you slide the
handle into the base to the desired hole and position. Release the knob and
turn it clockwise to secure the handle.
Attach F2 System™ Cap
Place the cap onto the end of the handle and secure it with the wrench. This
will allow repositioning without worrying about the handle becoming
dislodged from the base.
Adjust F2 System™
The F2 System™ handle can be used in a myriad horizontal and vertical angles.
Loosen the knob and pull it as you move the handle into the desired position.
Turn the knob clockwise to tighten it.
F2 System™
There is so much to share about the innovative F2 System™! We hope it will inspire and take your Spine Corrector work
to a new level of form and function. Using this system, springs can be attached from different angles and resistance
levels.
Attach Handles
Using Springs
Springs can be attached as needed using the included carabiner hooks. Open a carabiner and
slip the spring though. Clip the carabiner to the desired F2 System™ position.
Pilates Precision and Flow™
© 2015, BASI Systems™ all rights reserved.
