-
8
-
2. Explanation For Each Programmable Item
2.1.
Running Mode:
With “Forward with Brake” mode, the car can go forward and brake, but cannot
go backward, this mode is suitable for competition; “Forward/Reverse with Brake” mode provides
backward function, which is suitable for daily training.
Note: “Forward/Reverse with Brake” mode uses “Double-click” method to make the car go backward
.
When you move the throttle stick from forward zone to backward zone for the first time (The 1
st
“click”), the ESC begins to brake the motor, the motor speeds down but it is still running, not
completely stopped, so the backward action is NOT happened immediately. When the throttle stick
is moved to the backward zone again (The 2
nd
“click”), if the motor speed is slowed down to zero (i.e.
stopped), the backward action will happen. The “Double-Click” method can prevent mistaken
reversing action when the brake function is frequently used in steering.
By the way, in the process of brake or reverse, if the throttle stick is moved to forward zone, the
motor will run forward at once.
“Forward/Reverse” mode uses “Single-click” method to make the car go backward.
When you move the
throttle stick from forward zone to backward zone, the car will go backward immediately. This mode
is usually used for the Rock Crawler.
“Forward /Reverse with Brake=0%” mode uses like“Forward/Reverse with Brake” method to make the car
go backward, but brake force is 0%,
this mode is cancel electronic brake, to replace use one servo to
make the car brake. (like oil car ,use machine function make brake)
2.2.
Drag Brake Force:
Set the amount of drag brake applied at neutral throttle to simulate the slight
braking effect of a neutral brushed motor while coasting.
2.3.
Low Voltage Cut-Off:
The function prevents the lithium battery pack from over discharging. The
ESC detects the battery’s voltage at any time, if the voltage is lower than the threshold for 2 seconds,
the output power will be reduced 70%, after 10 seconds the output will be completely stopped, and
the red LED flashes in such a way: “
☆
-
☆
-,
☆
-
☆
-,
☆
-
☆
-”.
1
2
3
4
5
6
7
8
9
1. Running Mode
Forward
with Brake
Forward/Rever
se
with Brake
Forward and
Reverse
Forword
without brake
and Reverse
2.Drag Brake Force
0%
5%
10%
20%
40%
60%
80%
100%
3.Low Voltage
Cut-Off Threshold
Non-Protection
2.6V/Cell
2.8V/Cell
3.0V/Cell
3.2V
/Cell
3.4V
/Cell
4.Start Mode(Punch)
Level1
Level 2
Level3
Level4
Level5
Level 6 Level7 Level8 Level9
5.Max Brake Force
25%
50%
75%
100%
6.Max Reverse Force
25%
50%
75%
100%
7.Initial Brake Force
= Drag Brake
Force
0%
20%
40%
8.Neutral Range
6% (Narrow)
9% (Normal)
12% (W ide)
9.Timing
(Only for sensorless
motor)
0.00 °
3.75 °
7.50 °
11.25 °
15.00 °
18.75 ° 22.50° 26.25°
10.Over-heat Protection
Enable
Disable
11.Motor Rotation
Counter
Clockwise
Clockwise
12.Lipo Cells
Auto Calculate
2 Cells
3 Cells
4 Cells
5 Cells 6 Cells
Programmable
Items
Advanced Items
Basic Items
Options
【
PROGRAM THE ESC
】
1. Programmable Items List
(The italics texts in the form are the default settings)
8
