4
Instructions
Start-up
Insert the car player into the cigarette lighter port of the car, and it will start up
automatically. The display screen will display the current voltage of the car battery for 2
seconds, and then it enters the local or wireless mu sic playback state
FM Transmission Frequency Modulation
Operation method of using product as transmitter
To use the FM transmission function of the product, the user can play the music on the
mobile phone by connecting the music file stored in the extended storage (flash disk) or
via wireless of the mobile phone, and play from the car FM radio through FM
transmission, or by connecting it to the car player through the audio cable, and then
insert it into the AUX input jack of the car directly.
The operation method is as follows:
1.
Insert this product into the cigarette lighter port and turn on the FM radio.
2.
Long press the 'Mode Switching" key to make the FM radio frequency point
flashing. Toggle the "Mode Switching" key up and down to increase/decrease the
FM radio frequency point and switch to a channel without signal interference.
The display screen will display the switched channel. Then fine tune the car radio
device to ensure that their frequency bands are on the same point.
Wireless connection
1.
Turn on wireless of the phone, and find the device with wireless name "F40" in
the list of "other devices or devices to be paired" and click to connect. Then the
mobile phone will be paired with the car player. After successful pairing,
"Connected" will be displayed in the "My Device" of the mobile phone.
2.
Go bac k to the main interface of the mobile phone, open the local player or mu
sic APP from the mobile phone, and play the songs. Al this time, the car player
will transmit the song played on the mobile phone.
3.
After successful connection for the first time, the car player will automatically
memorize the mobile phone next time for the automatic reconnection. (If the
user actively turns off or deletes wireless within the connection range, the car
player wireless needs to be reconnected next time)
Answering the phone
After the wireless connection is successful, incoming calls will be preferentially identified
in any playing state of wireless, flash disk and AUX mode, and the incoming call ringtone
will be automatically switched. At this time, short press the "Play" key to answer the call,
and long press of the "Play" key to reject the call, and quickly double press the "Play" key
in any state to call back the last call.
