This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1534910_v1_0317_02_DS_m_2L_(1)
• Insert your smartphone in the desired position with
the screen facing towards you. Your phone must rest
on the foam pad (5) and the feet (1).
• Push your phone into the holder so that it presses
down on the release button (6). The clamping
arms (4) will spring back and lock your phone in
place.
Ensure that you press the release button with sufficient force, otherwise the
clamping arms may not spring back into place. If this occurs, press the clamping
arm back into place with your fingers.
• Secure your phone in place by wrapping the elastic
strap (2) around the front and back.
• Remove the elastic strap before removing your
phone from the holder.
b) Adjusting the position of your smartphone
•
To adjust the position of your phone, loosen the knurled
screw (10) on the clamp (turn anticlockwise) and turn your phone
to the desired orientation. Turn the knurled screw clockwise to
lock your phone in place.
Ensure that you observe all laws governing the use of mobile phones in and on
vehicles.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Suitable for mobile devices with a width of ......60 to 86 mm
Suitable for mobile devices with a height of ....118 to 139 mm
Handlebar diameter .........................................ø 16 bis 32 mm
Material ............................................................Polycarbonate (PC)
Operating/storage conditions ........................... -20 to +50 °C, 10 – 95 % relative humidity
(non-condensing)
Dimensions (W x H x D)
..................................
55 X 95 x 23 mm (smartphone holder),
90 x 110 x 27 g (clamp)
Weight .............................................................84 g (smartphone holder), 77 g (clamp)
