Operation
+
+
Replace the batteries once the speed reduces significantly.
Insert the screw attachment into the support as far as it will go.
If necessary, use a gripping tool to remove the screw attachment.
Maintenance and cleaning
• This product does not require maintenance. There are no components located inside the
product you need to maintain. Never open/dismantle the product. Have maintenance and
repairs done by qualified experts or repair shops only.
• To clean the product, a dry, soft and clean cloth is sufficient. You can use a long-haired, soft
and clean brush and a vacuum cleaner to remove dust.
• Never use any aggressive cleaning agents or chemical solutions as they may cause damage
to the housing or cause the product to malfunction.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ....................................................... 2 x AAA battery
Attachments ......................................................... SL1.5, SL3, PH0, PH1, T5, T6
Speed .................................................................. 100+ rpm
Sound pressure level L
PA
..................................... 39.3 dB(A)
Sound power level L
WA
......................................... 50.3 dB(A)
Standard deviation K ........................................... 3 dB(A)
Vibration level (in accordance with EN 60745) .... 0.109 m/s²
Uncertainty K ....................................................... 1.5 m/s²
Operating conditions ............................................ 0 to +45 ºC, 10 – 85 % RH
Storage conditions ............................................... 0 to +45 ºC, 10 – 85 % RH
Dimensions (W x H x D) ...................................... 175 x 25 x 20 mm
Weight ................................................................. 43.5 g
The noise level of the appliance may exceed 80 dB(A). Wear suitable ear defenders
to prevent hearing damage.
• The vibration emission value stated in this manual was obtained using a standardized
EN60745 test procedure. The result can be used to compare vibration levels of different
electrical tools. It can also be used to obtain a preliminary estimate of your exposure to
vibrations.
• The specified value indicates the vibration level when the tool is used for its intended
purpose. The actual vibration level may differ from the specified value if the tool is used for
other purposes, if other tools are used, or if the tool has not been serviced properly. These
factors can considerably increase your exposure.
• For an accurate estimate of your exposure, you must also account for the times when
the appliance is switched off or switched on but not actually in use. These factors can
considerably reduce your exposure.
• Take additional safety measures to protect the user against the effects of vibration, e.g.:
Maintenance of electric tool and insertion tools, keeping your hands warm, organisation of
work processes.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße
1, D-92240 Hirschau hereby declares that this
product conforms to the following directives:
2014/30/EU
2006/42/EC
2011/65/EU
It was manufactured in accordance with the
following standards:
EN 55014-1:2017
EN 55014:2:2015
EN 60745-1:2009 +A11:2010
EN 60745-2-2:2010
Click on the following link to read
the full text of the EU declaration of
conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol
and enter the product order number in the
search box. You can then download the EU
declaration of conformity in PDF format.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*1341239_v3_0220_02_m_dh_en
