Intended use
The headphones are used to convert electrical output signals from headphones outputs into
acoustical signals (sound waves). It is only licensed for connection to the headphones outputs
of audio devices.
For safety purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition,
improper use can cause hazards such as short circuiting, fire, electric shock etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
Delivery content
• Headphones
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
Persons / Product
• The product is not a toy. Keep it out of the reach of children and pets.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Do not listen to excessively loud music over a longer period of time. This may damage your
hearing.
• Connect the product only to suitable headphone outputs. This helps you avoid distortions or
maladjustments, which may cause damage to the headphones or the connected mixer. When
doing this, also observe the connection data in the chapter “Technical Data”.
• If your mixer does not include a matching socket for connection of the headphones, use a
suitable adapter.
• Use the headphones only when circumstances allow operation. Make sure that the operation
of the device does not impair your concentration on your immediate surroundings.
Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operation
1. Switch off the audio source to which the headphones will be connected.
2. Plug the 3.5 mm stereo jack plug into the headphones jack.
3. Switch on the audio source.
4. Turn the volume level to the lowest with the volume control of the audio source.
5. Put on the headphones, the length of the headband can be slightly adjusted.
6. Adjust the volume to your desire level with the volume control of the audio source.
Disposal
In order to preserve, protect and improve the quality of environment, protect human
health and utilise natural resources prudently and rationally, the user should return
unserviceable product to relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately
and not as municipal waste.
Technical data
Impedance ............................................32 Ω
Frequency .............................................20 – 20000 Hz
Sensitivity .............................................115 dB ±3 dB
Power ...................................................30 mW
Driver Ø ................................................27 mm
Cord length ...........................................1.8 m
Operating temperature .........................0 to +50 ºC
Jackplug ...............................................3.5 mm
Weight ..................................................36 g
Operating instructions
Lightweight headphones black
Item no. 1093179
Version 08/14
°
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
