InItIaL PrEParatIOn:
A. Install 1 x 9V battery into the compartment underneath the Main
Scale unit.
B. Place the unit on a dry, flat, solid ground surface. Ensure the unit is
stable. Avoid carpet, or uneven ground surface.
Fat MOnItOr ScaLE OPEratIOn
Initial Set up:
1. Press ‘On/Set’ button to wake up the unit. All LCD segments light up
briefly and prompt to setting mode starting from Memory selection.
By pressing ‘On/Set’ button again will take you through cycle of set-
ting all parameters. See following illustration:
ILLuStratIOn StEPS:
I. Press Up/Down Arrow (▲▼) button to advance/reverse to the
desired memory station. Press ‘■’ button to confirm setting. LCD
will prompt to next parameter setting (Gender).
II. Press Up/Down Arrow (▲▼) button to advance/reverse to
choose your Gender. Press ‘■’ button to confirm setting/LCD
will prompt to next parameter setting (Height).
III. Press Up/Down Arrow (▲▼) button to advance/reverse to adjust
4
Press ‘■’
Press ‘■’
Press ‘■’
Press ‘■’
Press ‘■’
Press ‘►’
Height
Memory selection
Enter normal fat monitor operating mode
Age
Gender
ILLuStratIOn 1
