Base aire UVC2 Pro, Installation & Operation Manual

Page: 6 / 12

4
Mistakes and shortcomings
The equipment has been checked for normal function several times during the production process.
If the fault still occurs, please check the equipment according to the following list.
Warning
Electric shock is life-threatening!
Before performing any operation on the device, please unplug the power plug from
the socket. Do not bypass any electrical safety devices!
!
Problem Cause
Device does not work
The fuse is blown
The power plug
is damaged
Solution
Replace the damaged fuse and/or
reopen the fuse. Be careful! The fuse
does not need to be repaired, but it
must be replaced at any time. In most
cases, the fuse is triggered by a serious
technical failure. Please authorized
service personnel to replace each fuse!
Let certified personnel inspect the
equipment
.
Loud noise
Disconnect the power supply of the
device and check whether the power
plug and connecting cable are damaged
.
Plug the plug into the socket.
The connection
parameters do not match
the technical
specifications
Check the connection to the main line.
Connection parameters: 110 V/ 60Hz.
Even if the cleaning
process has been
completed, the odor
pollution still persists with
the same intensity
Send the equipment to a certified
professional workshop for repair
.
This device is placed in
an uneven place
.
Reactor damage
Power is not turned on
Damage to the fan and/or
its bearings
.
Place the device on a flat, solid, dry
surface
.
In order to ensure the normal operation and trouble-free operation of the equipment, it must be cleaned
and maintained regularly.