After verifying the device's completeness, you can switch to the
exit button
connection.
Electrical connection
IMPORTANT
It is strictly forbidden to supply more than + 12.
2
V to the SH-4
7T
button.
Do not load the output contact of the button with a current exceeding
100 mA.
It is strictly forbidden to use the SH-4
7T
button to use the power supply
used to power the lock
.
It is necessary to use a separate power supply to which locks and other
high-consumption equipment are not connected
.
Purpose of wires:
Red:
+ 12V (+ 1%, - 15%).
Black:
Ground (General).
Brown:
Transfer to trigger
mode.
Green:
Changes the backlight
color to green.
Yellow:
Controlled output.
CONTROLLER
←
Out
←
←
Input
Input
Yellow (-)
Red (+)
Black (-)
Brown (-)
Green (-)
