BAS-IP SH-46T, User Manual

Page: 3 / 12

3
Eng
Completness check of the product
Before installation of the door bell , it is necessary to check that it is complete
and all components are available.
Exit button kit includes:
Door bell 1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the door bell
connection.
Electrical connection
IMPORTANT
It is strictly forbidden to supply more than + 12.5V to the SH-4 6TE bell .
Do not load the output contact of the button with a current exceeding
100 mA.
It is necessary to use a separate power supply to which locks and other
high-consumption equipment are not connected .
Purpose of wires:
Red: + 12V (+ 1%, - 15%).
Black: Ground (General).
Brown: Transfer to trigger mode.
Green: Changes the backlight color to green.
Yellow: Controlled output (when pressed,
voltage is removed and ground appears).
+
-
+12 Volts DC
Power LAN (PoE)
1
2
3
4
5
6
+U
GND
AL1
AL2
AL3
AL4
RS 485
1
2
3
4
+12V
GND
485+
485-
Siren/Alarm Loops
O
U
T
+
12
V
G
N
D
Yellow (-)
Red (+)
Black (-)
Flush mount bracket
Set screw kit
Manual
1 pc