BAS-IP SH-45E, User Manual, Page: 3 / 8

EAN: 5060514913093 (BLACK) EAN: 5060514910573 ( SILVER )
Completness check of the product
Before installation of the exit button , it is necessary to check that it is complete
and all components are available.
Exit button kit includes:
Exit button
Manual
Wrench set screws
1 pc
1 pc
1 pc
After verifying the device's completeness, you can switch to the exit button
connection.
Electrical connection
IMPORTANT
It is strictly forbidden to supply more than + 12. 1 V to the SH-45 E button.
It is not allowed to exceed the current flowing through the switch contacts
of more than 100 mA.
It is strictly forbidden to use the SH-45 E button to use the power supply
used to power the lock .
It is necessary to use a separate power supply to which locks and other
high-consumption equipment are not connected .
Blue
Blue
SW NO
PIEZO
SWITCH
Red (+)
Black (-)
Brown (-)
Green (-)
(Toggle)
GRN
CONTROLLER
Purpose of wires:
2 Blue: Output of dry NO
contacts .
Red: +12V, to power button .
Black: Ground .
Brown: Setting the device
to trigger mode .
Green: Change the color
of the backlight to green .