Device Settings
In this menu, you can configure:
P
anel operation
mode
•
•
Wall mode
is used when the panel is installed on the perimeter of the object.
If this variant is chosen, on the panel you must enter
Building No.
,
Unit No.
,
Floor No.
, and
Apartment No.
to call the necessary monitor.
Unit mode
is required if the panel is installed near the unit entrance.
•
When using this mode, it is enough to enter
Floor No.
and
Apartment No.
to call the necessary monitor.
•
D
evice
language
(Russian, English, Ukrainian, Spanish, Polish, or Dutch)
•
P
anel logical address (
Building No.
,
Unit No.
, and
Device No.
)
For correct functioning, the panel and the monitor must have the same
building
and
unit number
in apartment settings. Also for monitors, you must indicate corresponding information about the floor,
apartment, and device number.
If you have more than 1 entrance panel with the same logical address, you need to specify their
device numbers
, starting from 1 for the main device, and from 2 to 9 for others.
•
A
dmin password to enter device settings and web interface
L
evel of panel speaker
volume
•
P
anel camera stream
resolution
(320x240 / 640х480 / 1280х720)
•