7.
8.
9.
Next place the RH insert panel (
E
) onto the
right hand side of the bay.
Take the first of the confectionery shelves 2 (
G
) and
position over the lowest set of metal studs on the
right hand panel of the existing display and the RH
insert panel (
E
). Snap the shelf into place as in step 6.
Install the remaining confectionery shelves (
G
) to
create a 4 tier module on the right hand side as
shown above.
10.
Take the pre-assembled 3 tier news shelf (
H
)
and locate it between the LH and RH insert
panels (
D,E
). Snap the shelf (
H
) into place with
the slots on the shelf locating with the metal
studs on the LH and RH insert panels.
11.
12.
13.
14.
Snap the small news shelf (
F
) into the space above
the 3 tier module and the 3 tier shelf (
H
) as shown.
Guide the slots onto the metal studs. Push down
and pull towards the front until the shelf ‘snaps’
into place.
Install the 140mm shelf (
J
) on the top set of
metal studs and snap in place as shown in
step 12.
To complete the assembly place the divider (
K
)
into the news shelves (
I,J
) as shown above.
G
H
I
J
E
K
K
K
I
I
i.PUSH
DOWN
ii.PULL
DOWN
