Installation and operation
114356
13 / 16
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2
Operation
Before First Use
1. Before use, clean the appliance observing indications in section
'Cleaning'
.
2. Dry the appliance thoroughly.
Appliance Start-Up
1. Plug the appliance into a suitable single socket.
2. Switch the appliance on using ON/OFF switch located at the back of the
appliance.
3. Set the desired temperature (up to 95°C) using the temperature controller at the
front of the appliance.
The red heating indicator light will be on.
The red heating-up indicator light goes off after the set temperature has been
reached. When the appliance cools down, the red indicator light lights up again, and
the warming plate i heated-up anew. Due to this function the warming plate is
protected against overheating.
