Installation and operation
20 / 30
109901
EN
5.2
Electrical Connection
• Verify if the technical specification of the appliance (see the rating plate)
corresponds to the characteristics of the local electric mains grid.
• Connect the appliance to a single, properly grounded mains socket with a
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.3
Operation
Display Messages
Fig. 5
a
–
current time
b
–
information about the day of the week
c
– appliance:
M3
– flow rate; PPM, dH, FH – water hardness unit, dH – German
hardness, FH
– French hardness, Kg – total resin replacement capacity.
d
– cycle stage:
When this message flashes, it means that the control is moving to
the current cycle stage.
e
– wireless control:
When this message appears, it means that the wireless unit
can control the valve.
f
– backup battery:
The battery is installed. When this message flashes, it means
that the battery level is low.
Summary of Contents for WEH1500
Page 1: ...WEH1500 109901...
