- 31 -
Heating tubes emitting infrared radiation will immediately start dissipating the heat.
HOT SURFACE! Burn hazard!
During the operation, the heater becomes very hot. Never touch the
device during the operation and immediately after its shutdown
After the use, switch the heater off with the main switch located at the right side,
switching it to
“OFF”
position and disconnect it from the power (pull the plug from the
socket!).
6. Cleaning
WARNING!
Before cleaning, switch the device off with the main switch, disconnect
the device from the power supply (pull the plug!) and leave the device to
cool down.
The device is not designed to be rinsed with running water.
The device is not suited for direct washing via water jets!
Protect the device from water penetration.
CAUTION!
Never use aggressive or abrasive cleaning agents.
Do not use flammable cleaning agents (e.g. gasoline or solvents)!
Do not use sharp or pointed objects.
o
Clean the device regularly.
o
Wipe the housing of the device with a soft, moist cloth and then dry the cleaned
surfaces thoroughly.
o
Clean the protective fins with a soft brush or vacuum cleaner.
o
Use only soft cloth for cleaning of the device.
o
Any maintenance and repair work, including heating tube replacement, may be
performed only by an electrician.
