- 34 -
Switching the device on
•
Connect the device to a single, grounded socket.
•
Switch the device on using the main switch on the right side of the device, setting it
to
“ON”
position. The stand-by mode indicator on the control panel will come on.
•
To switch on individual heating tubes, press
ON/OFF
switch on the control panel
or use the supplied remote control.
Remote control
The infrared heating tubes may be switched on or off with
the remote control
button, as needed.
1 press once → the heating tube is switched on
Press again → the heating tube is switched off,
the device
in standby mode
•
Heating tubes emitting infrared radiation will immediately start dissipating the heat.
HOT SURFACE! Burn hazard!
During the operation, the heater becomes very hot.
Never touch the device during the operation and
immediately after its shutdown.
•
After the use, switch the heater off with the main switch located at the right side,
switching it to
“OFF”
position and disconnect it from the power (pull the plug from the
socket!).
