- 29 -
5.2 Operation
Before use, clean the device according to the instructions set out in point
6
“Cleaning”
.
Prepare appropriate cups. Prior to filling
the device, the cups must be cleaned
and dried. Place them upside down on
the intended surfaces for cups.
The cup warmer has two directly
heated surfaces for cups, each
measuring 280 x 295 mm. Height of
this surface is 175 mm.
Each surface for cups is equipped with a
separate ON/OFF switch and temperature
control knob. Heating power of each
surface is 70 W.
The upper unheated storage space may
be used for placing saucers or cups.
Plug the device into a single grounded socket.
Using appropriate
ON/OFF
switch turn the relevant surface for cups on.
Green lamp will come on.
Set the desired temperature for each surface
for cups by turning the temperature control
knob within the range from 1 to 10.
The cup warmer is heated automatically (up to approx. 60 °C at the highest 10
setting of the temperature control knob). The cups are kept warm as long as the
device is in operation.
NOTE!
Fill the surface for cups with one layer of cups to achieve an optimum degree
of warming.
