Installation and operation
12 / 16
A120814
EN
Connection
— electrical Power
• Check if technical specifications of the appliance (see rating plate) correspond
to local electrical grid specifications.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
5.2
Operation
1. Prior to first use, clean the appliance thoroughly, observing instructions in
section 6.
“Cleaning”
.
2. Finally, dry the appliance thoroughly.
3. Open both parts of the cover.
ATTENTION!
The appliance overheats when operated with cover closed.
The plate warmer should be used with open cover, otherwise the
appliance may be damaged.
Turn off the appliance and leave to cool down before closing the cover.
4. Connect the appliance to a single mains socket with protective contact.
5. Switch the ON/OFF switch to
“I”
position.
Red indicator light will illuminate; the light will only go out, when the appliance is
switched off with the ON/OFF switch (set it in
“O”
position).
After a few minutes, the plate warmer reaches working temperature.
6. Set plates accordingly, in slots designed for this purpose.
The plates will be kept warm for the required period.
7. Take warmed plates out of the appliance as needed.
Summary of Contents for T12
Page 1: ...T12 A120814...
