- 46 -
Storing the device
o
If the device is not used for a long time, clean it according to the above description
and store in a dry, clean place, protected against cold, sun and, children.
Do not place any heavy objects on the device.
7. Possible Malfunctions
In case of operational anomalies before contacting the customer service department or
vendor check the troubleshooting table below.
In case of non-operational device:
1. Check the supply cable to make sure it is properly connected to the socket.
2. Check the supply cable for damages.
3. Check the socket by connecting another device.
4. Check if the ON/OFF key is illuminated. If so, make sure it was pressed for longer
than 1 second.
5. The digital is on, but the device does not start the cooking process, the display shows
the error code. The following error codes may be displayed:
Error -
Code
Cause
Solution
E001
The basin is empty
Fill the basin with water above the
“MIN” mark
The water level is too low
Fill the basin with water above the
“MIN” mark
The device is not placed on
the even surface
Place the device on the even surface
Despite correct filling with
water the sensors indicate too
low water level
Add some salt to the water and stir
well
Error in the electronic system
Contact the service company.
