- 39 -
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem
Cause
Removal
Device is connected to
a power source, green
control light does not
come on, device does
not heat up.
•
Plug improperly inserted
into socket
•
Blown fuse
•
Control box is improperly
installed
•
Overheating protection
mechanism has been
activated.
•
No contact with
microswitch
•
Remove plug and insert
properly
•
Check fuses, connect
device to another socket
•
Check the location of the
control box
•
Press RESET on the
control box
•
Contact sales agent
The orange heating
control light comes on,
the temperature does
not increase.
•
Interrupted contact with
the heating element
•
Damaged heating element
•
Contact sales agent
•
Contact sales agent
Green control light
comes on but the
orange heating control
light does not come on
in spite of desired
temperature being
reached.
•
Set temperature has been
reached
•
Damaged temperature
control
•
Damaged control light
•
Check functioning at
different temperature
•
Contact sales agent
•
Contact sales agent
Heating element ceases
functioning after some
time.
•
Overheating protection
mechanism has been
activated.
•
Press RESET button in
the control box.
If the overheating
protection activates
again within a short time,
contact the sales agent.
