Installation and operation
14 / 18
100273
EN
Toasting
WARNING!
The appliance becomes hot during operation! Hot external surface!
Do not touch any hot surfaces nor insert your hands into the conveyor
toaster.
Right after switching off, the appliance remains hot.
You can move or transport the appliance only when it has cooled down
completely.
1. Switch the appliance on with the ON/OFF switch located at the left of the rear
panel of the appliance.
The green indicator light integrated with the ON/OFF switch will come on.
The green operation mode indicator light will also come on, signalling that the
appliance is operation ready.
The conveyor toaster needs approx. 5 minutes to heat up.
2. Depending on the selected product (toast bread, sandwich toasts, bun or bagel
halves), rotate the function selector knob clockwise and select one of the
functions.
The following temperature settings are available:
– Bottom heater
– Top heater
– Top/bottom heater
When the function selector knob is set in one of the setting positions, the red
heating-up indicator light will come on.
When the function selector knob is rotated to OFF position or when the appliance is
switched off with the ON/OFF switch, the red heating-up indicator light will go off.
3. Use the right controller to set the required conveyor belt speed.
The conveyor belt speed may be set steplessly in the range of 1
–7.
The slowest conveyor belt speed equals a longer toasting time, and the fastest
conveyor belt speed equals the shortest toasting time or the smaller browning level
of toast slices or other products.
Summary of Contents for Mini-XS
Page 1: ...Mini XS 100273 ...
