Installation and operation
370270
17 / 26
EN
4. Moisten the baking trays with food oil three or four times.
Settings
The waffle maker is controlled with two push rotary control knobs:
– Push rotary time control knob
– Push rotary temperature control knob
The push rotary control knobs are integrated with digital displays that allow reading
the most recently set time and temperature.
Indicator lights evidence the operating modes.
Design of the Push Rotary Control Knobs
Push rotary control knob
Digital display
Indicator light
Temperature Setting
The temperature is set with push rotary control knob. A short press and rotation of
the push rotary temperature control knob you may set the required temperature in
the range of 50
–300°C and in 1°C increments. Another press of the push rotary
temperature control knob the set value is stored and displayed on digital display.
The appliance will be heated up to the set temperature. The red indicator light on
the push rotary temperature control knob is lit during the heating up process. As
soon as the set temperature is reached, the indicator light goes off. It takes approx.
10 minutes to heat the appliance to 200°C.
Time Setting
The duration of appliance operation is set with the push rotary time control knob. A
short press and rotation of the push rotary time control knob you may set the
required time in the range of 0
–9:30 minutes and in 1 minute increments. Another
press of the push rotary time control knob the set time is stored and the remaining
time is displayed on digital display (it is counted down in 1 second increments).
