Installation and operation
14 / 20
200127
EN
Before Use
1. Before use, clean the appliance observing instructions in section 6.2
'Cleaning'
.
WARNING!
It is important that only fresh potable water is poured into the water tank.
Do not fill the appliance with any non-potable liquids, like acids, lyes, oils,
nitrates, etc.!
NOTE!
To reduce heating time and save energy, the tank may also be filled with
hot water. This saves time and energy.
2. Pour required amount of fresh water into the water tank and tea brewer (only up
to 'MAX' mark).
3. To prepare a tea essence in the appliance, put a required amount of leaf tea into
the tea strainer and put the strainer in the tea brewer with integrated water tank.
4. Place the lid on the water tank.
5. To close the water tank rotate the lid clockwise, until the plastic parts of the lid
lock in lid holders (rotary lock).
6. Fix the drip tray on the appliance base and insert the drip grate.
Appliance Operation
7. Plug the appliance into a suitable single socket.
8. Switch the appliance on with the ON/OFF switch.
The red power indicator light will be lit and will remain on during the entire working
process.
9. Set the desired temperature using the temperature control knob.
The temperature control range is 30
–100°C.
When the temperature controller is operated, the orange heating-up indicator light
lights up.
The water is now heated up to the set temperature. As soon as the set temperature
is reached, the orange heating-up indicator light goes off. Rotate the temperature
controller to the desired temperature at which the water should be kept.
When the temperature of water in the water tank drops, the thermostat switches
back on and the orange heating up indicator light is lit again.
Summary of Contents for M8000
Page 1: ...M8000 200127...
