47
7. Possible Malfunctions
Problem
Solution
The device does
not turn on.
•
Check the power supply
•
Check if the device’s fuses are damaged.
•
Check if the device’s door is closed properly.
•
Check if the cooking/baking parameters are properly set.
•
Check if the device does not display any error messages.
If the device does not turn on after trying some of the above solutions,
contact customer service.
The ventilator stops
working while the
device is in use
•
Turn the device off and wait until the motor overheating safety
device turns itself on again.
•
Check if ventilation ducts are blocked.
If the problem occurs again, contact customer service.
Internal lighting does
not work.
Use only temperature-resistant light bulbs!
Change the light bulb as follows:
•
Check if the multipolar switch is open and the device has
cooled.
•
Open the internal glass pane (6.2 „Cleaning“).
•
Remove the protective glass cover.
•
Change the light bulb.
If the problem occurs again, contact customer service.
Water does not
reach the hose.
•
Check if the water flow stopcock is open.
If the problem occurs again, contact customer service.
Thermal probe
does not work.
•
Check if the time dial is set to position
I 6
(unlimited time).
If the problem occurs again, contact customer service.
The situations given above are only examples of potential problems. If these or
other similar problems occur, turn the device off immediately and stop using it.
Contact qualified personnel or the producer to inspect and repair the device.
