Bartscher KV8,1L, Original Instruction Manual, Page: 18 / 20

Cleaning
16 / 18 190085
EN
Switching Lighting ON/OFF
The appliance is equipped with LED lighting. It is located in internal compartment
ceiling.
1. In any case, if switching the LED lighting ON is required, press the LED lighting
key.
2. In any case, if switching the LED lighting OFF is required, press the LED lighting
key again.
6 Cleaning
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
1. At the end of a working day clean the appliance thoroughly.
2. Remove all objects from the appliance.
3. Clean the internal compartment with warm water and soft cloth or sponge. Use
mild cleaning agent if required.
4. Wipe the washed surfaces with a cloth moistened in clean water.
5. Wipe the appliance housing and door with frame with a soft, moistened cloth.
6. Finally, dry thoroughly all washed surfaces.
7. Leave the door open for the appliance to dry completely.
8. The condenser should be cleaned at least once a month with a vacuum cleaner
or a brush, to remove the built-up dust.
9. To clean the condenser, remove sheet metal cover at the rear wall of the
appliance.