- 41 -
CAUTION!
Never place empty pans on the hob.
Warming up an empty pot or frying pan activates the overheating protection
system; an error acoustic signal sounds and the device turns off. The digital
display shows “E2”.
Remove the cookware from the hob and leave the device for a few minutes to
cool down. Then, you may start using the device again as usual.
Settings
Power
To start the device, turn the control knob to the right until you hear a “click”.
The device turns to the power mode and the display shows
default power level “1“
.
The power LED indicator light (
) will come on.
Using the control knob at any time you can change settings within the range 1-10.
The digital display shows the selected power level.
Temperature
To leave the power mode, by pressing the function key
you can move to the
temperature mode. The device switches to the
factory-set temperature of 60 °C
,
which appears on the digital display. The temperature mode indicator light ( ) will
come on.
You can modify the settings between 60 °C and 240 °C using the control knob.
The following settings are available:
60, 80, 100, 120, 140, 160, 180, 200, 220 and 240 °C
.
NOTE!
During the operation it is possible to switch between the power and
temperature modes at any time, by pressing the function key
and
selecting the desired power or temperature level using the control knob.
