8 / 8
850027
EN
Dispensing the Disinfectant
1. Dispense the disinfectant as needed, holding
your palm underneath the disinfectant dispenser.
Owing to the infrared sensor, exact dosing of the
disinfectant is effected: depending on the settings,
the spraying i effected once or twice.
The LED indicator light (9) blink once or twice in
green.
The front cover sight glass makes it possible to
verify the filling level of the disinfectant container.
Fig. 6
Cleaning and Disinfecting
ATTENTION!
For cleaning, never use any scrubbing nor acute cleaning agents,
neither cleaning agents that contain chlorine, as they may damage the
surface.
Do not wash the disinfectant dispenser under running water.
1. Regularly perform disinfecting cleaning by wiping external surfaces of the
disinfectant dispenser.
2. Before each refilling of the disinfectant dispenser thoroughly clean it manually.
Follow the below described steps.
3. Remove the disinfectant container from the housing.
4. Use a soft, damp cloth to wipe the inside and the outside surface of the housing.
5. Dry all cleaned surfaces thoroughly.
6. Fill the disinfectant container and place it in the housing.
7. Lift the front cover and close the disinfectant dispenser with the key.
8. Use a disinfectant tissue to wipe the outside of the housing.
Summary of Contents for IRS 1L-W
Page 1: ...IRS 1L W 850027 ...
