- 41 -
The selection buttons
or
can be used at any time to change the setting within a
range of 60 °C – 240 °C at intervals of 20 °C. The selected temperature is displayed on
the digital display.
The device will heat and maintain food at the set temperature. Power is regulated
automatically.
NOTE!
If the device is turned on without cookware placed on it or if the cookware is
removed from an active device, an alarm will sound, the error message „E0“ will
appear on the digital display, and the device will go off after approx. 30 seconds.
Setting the time
To set the cooking time, press the buttons
until the time setting control light
comes on.
The digital display will show „0“ and the time setting control light
will come on.
Using the selection buttons
or
you can now set a working time of 1-5 minutes,
then at 5-minute intervals (max. 180 minutes). Time is counted at one-minute intervals;
after a few seconds the digital display will return to showing the previous value.
After the set time has elapsed, an alarm will sound and the device will go into standby
mode.
NOTE!
While in use, the time can be adjusted at any moment by pressing
the selection buttons
or
. The device’s memory function
leaves the power and temperature settings unchanged.
Blocking buttons
The device is equipped with two blocking buttons
(one for each hob). After selecting
the functioning mode, these buttons (power or temperature) can be pressed to block
functions. The control lights above these buttons will come on and indicate that other
buttons cannot be activated during that time.
To remove the blockade, press the blocking buttons for 2 seconds until the control light
goes off again. Now all buttons can be used.
