- 28 -
5.2 Operation
Before the first use
•
Before the first use, clean the device according to the instructions included
in section 6 ”Cleaning“.
•
Attach the drip tray at the back of the device.
•
Connect the device to a single grounded outlet.
•
Turn the device on with the function switch („I“ position) and heat it at the
highest temperature setting “HI” for ca. 5 minutes without any food. Take into
account the instructions regarding settings included in subsequent sections of
this operating manual.
•
During the first use, some smoke may appear, which is not dangerous and will
not occur during future use.
•
Turn the device off by turning the temperature control knob to “OFF“ position
and switching the function switch to „0” position. Allow it to cool down.
Function and temperature setting
Function switch is located on the right side of the device, next to the side
handle.
Possible settings of the function switch are as follows:
-
In „0“ position the device has no power supply.
-
In „I“ position all 3 grilling or food warming surfaces can
be used simultaneously.
Please remember that after switching from the grilling
function to the food warming function, reduction of the
grilling surface’s temperature takes some time.
-
In „II“ position, the middle and left surface can be used for grilling,
whereas the right one can be used for food warming.
Temperature is adjusted via the temperature control knob located on the
front panel of the device. The following temperature settings are available:
OFF
-
OFF position
LO
-
setting for low temperature ca. 80 °C
2
●
3
●
4
●
5
●
6
-
adjustment levels
HI
-
setting for high temperature ca. 300 °C
Summary of Contents for GP2511GN
Page 1: ...104919 GP2511GN V1 0915...
