370236
5 / 6
EN
Assembly
Assemble the hamburger press following the indications below:
1. Screw off the thumbscrews (4).
1. Insert hamburger press onto the locking ring of meat grinder.
2. Lock the press with the locking lever (5) located at the side.
3. Make sure the locking lever (5) latches correctly in the locking ring groove.
4. Tighten the thumbscrews (4).
Operation
Observe operation indication for 370235 meat grinder specified in section
“Operation”
.
1. Place the prepared meat in the grinder funnel.
2. Move it to the filling shaft.
3. Close the hamburger press form so that the hollow area is located at the outlet.
The meat grinder starts to fill the form.
4. Lift the form from a holder, as soon as the hollow area is filled enough.
The meat grinder stops operation.
5. Remove the formed hamburger patty from the hollow area.
Summary of Contents for FW200
Page 1: ...FW200 370236...
