- 23 -
•
If it is necessary to disassemble the device or if it is unused for a longer period of
time, always turn it off by the ON/OFF switch (set to position "O") and remove the
plug from its socket.
•
Keep hands, hair, clothing and kitchen accessories away from moving parts to
prevent injury and reduce the risk of damage to the device.
•
Never use the device when the motor housing is wet or when a liquid has got into
the device or under its surface. To avoid the risk of electric shock, fire or damage,
turn the device off using the ON/OFF switch (set to position "O") and remove the
device's plug from its socket. Clean it in accordance with the instructions in 6.2
"Cleaning" and dry the surface on which it is placed.
•
Never leave the device unattended when it is connected to a power source.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
5.2 Installation and connection
•
Unpack the device and remove all packing material.
•
Place the device on a flat and safe surface able to support its weight and remain
stable.
•
Never place the device on a flammable service.
•
Do not place the device on a humid or wet surface.
•
Do not place the device near an open flame, electric oven, heater or other source of
heat.
•
Ensure a clearance of 15 cm on all sides of the device, and ensure there is sufficient
clearance above the device to freely operate the juicing arm and access the ON/OFF
switch.
•
The electrical circuit must be secured to a minimum of 16A. Connect the device to a
wall socket; do not use extension cords or power strips.
•
Place the device so that the plug is easily accessible if it becomes necessary to
quickly disconnect the device from its power source.
Summary of Contents for CS1
Page 1: ...CS1 150146 V1 0213 ...