
- 41 -
To supply the device use only
adapted gas bottles (11 kg or 5 kg).
Use only gas bottles of the following
dimensions (fig. on the right):
1. Maximum diameter:
Ø 300 mm , alternatively Ø 229 mm
2. Maximum height:
600 mm, alternatively 505 mm
Never use the gas bottled with damaged housing, valve, flange / cup or rim of the
base of gas bottle. Dented or rusted gas bottle may be dangerous and must be
checked by the gas seller.
Transport and store gas bottles only in upright position.
Never allow overturning of the gas bottle. Do not neglect and do not handle the gas
bottle carelessly.
Never leave the gas bottle in a car on hot days.
Handle empty gas bottle the same was as full gas bottle. Also when the gas bottle
seems to be empty, there may be some gas pressure present. Always close the
valve of the gas bottle before dismounting the bottle.
Pressure regulator and flexible gas hose are required for gas connection. These
elements
are not
part of the supply. Contact the gas seller to obtain information
about appropriate pressure regulator and gas hose.
Use an appropriate pressure regulator, certified according to DIN EN 16129:2013.
Use only pressure regulator and gas hoses which are appropriate for liquid gas.
Take into account the data presented in the table on page 39
.
Use of inappropriate pressure regulators or gas hoses is not safe; before the
use of the grill always check parts for their adaptability.
The applied gas hose must be compliant with a standard for a given country. A gas
hose may have the maximum length of 1.5 m. Damaged or worn out gas hose must
be replaced.
Place the gas bottle inside the opening intended for this purpose in the lower
cupboard.
Make sure that the gas hose connected to the gas bottle is not twisted or bent.
No part of the gas hose may touch any part of the grill.