- 41 -
5.2 Operation
CAUTION!
The deep fat fryer can be serviced only be people who are familiar with
operation of the device and the risks occurring during frying.
Preparation of the device
Using the handles, remove the cover and take the frying basket out of the device.
Detach the control box from the device by lifting it carefully (until you hear
„click“
sound).
Before the first use, thoroughly clean the device and its accessories according
to the instructions in
section 6 „Cleaning“
. Make sure that no water gets into
the electrical installation or control box. Next, dry the device and accessories
thoroughly
!
Carefully place the control box on the rear edge of the base unit. Pivot at the
bottom of the control box must be placed in the opening of the oil basin for the
device to be set correctly.
Note
: For safety reasons, the device operates only when the control box is properly
secured to the body, thanks to which the micro switch indicates that the device is
ready to operation.
Control elements
Control box with
heating element
Heating indicator
Power indicator
(green)
ON/OFF
switch
Temperature controller
