Installation and operation
A120823
13 / 30
EN
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Keep minimum distance from flammable walls and objects; maintain clearance
of 10 cm at both sides and 20 cm at the rear.
• Fix the enclosed feet by screwing them under the appliance.
Note:
Do not operate the appliance without feet.
HINWEI S
IMPORTANT!
The appliance is not suitable for built-in installation.
Water connection
1. Make sure that the potable water connection is located close to the appliance.
2. Prior to establishing the water connection, flush the appliance with enough water
to remove all residues of substances that might be present in tubes, so that they
do not enter solenoid valves.
NOTE:
To provide for proper functioning and prevent limescale deposits in the
oven chamber, the appliance should be supplied with potable water, with
hardness of 0.5
–5 ° dH (German degrees). With higher values it is
necessary to install water softening system.
3. Connect the enclosed pressure hose to the inflow pipe stub (3/4") at the rear
face of the appliance.
4. Connect the other end of the pressure hose to the cold water installation with a
stopcock.
Summary of Contents for AT230-MDI
Page 1: ...AT230 MDI A120823...
