- 45 -
If you wish to remove the food product from the refrigerator-flash freezer, press the
START button
to suspend the rapid freezing cycle.
To place the unit in STANDBY mode, press and hold for 3 seconds one of the following
buttons
.
The internal unit temperature will be displayed in green.
The refrigerator-flash freezer is prepared for a new rapid cooling cycle.
To begin the next cooling cycle, press and hold for 3 seconds one of the following
buttons
.
NOTE!
To turn the unit off, hold the START button
for 3 seconds.
Tips for the user
CAUTION!
The refrigerator-flash freezer can not be used as a normal refrigerator!
CAUTION!
Do not place food products in the unit which have a temperature above 70°C, as
the high pressure alarm may be activated.
••••
For best results, we recommend pre-cooling of the unit by leaving it turned on until the
conservation temperature is reached.
••••
To avoid damaging the unit, proceed in accordance with the following
recommendations:
Do not place warm food products inside the unit;
Activate the appropriate cycle immediately after placing a food product into
the unit;
Avoid covering or closing containers (this includes isolation foil), as quickest
and best results are achieved with the largest possible surface area;
