A120355
5 / 9
EN
Assembly
Fig. 2
Fig. 3
1. Place the clamp attachment on an
even, non-slip surface.
2. Turn the eye bolt until the surface
for placing cans will be screwed well
to the tabletop.
3. The clamp attachment may be
additionally attached to the tabletop
with 3 bolts by screwing them into
designated holes.
4. Insert the square pipe of the can
opener to the hole in the clamp
attachment. Put a cap on a lower
end of the square pipe.
5. The square pipe may be set at
different heights, depending on the
can.
Fig. 4
Opening of Cans
1. Before the first use, make sure that the stainless steel blade and transport wheel
are clean, because they will come into contact with food. Observe the
instructions included in section
“Cleaning”
.
2.
Before opening, clean the can’s lid with a moist cloth.
Summary of Contents for A120355
Page 1: ...KB565 A120355 ...
