Operating Instruction
24 / 34
2956041
EN
6
Operating Instruction
6.1
Operation
•
Przed pier wsz ym uż yciem wycz yś cić urządz eni e i wypos ażenie zgodni e z e ws kazówkami z awartymi w
pu nkcie 6 „Cz yszczen ie”
. M ake s ure no water enters elec tric ins tall ati on and connection box. N as tępni e dokładni e os usz yć urz ądzenie i elementy wyposaż enia.
•
Setzen Sie di e Boden-Abdec kung in das Bec ken ei n. T he c over acts as a spac er bet ween t he heating element and l eft- over f ood tray.
•
Caref ull y i nser t t he c onnection box wit h the heati ng element at t he bac k edge of t he applianc e. A pin in bott om par t of t he c onnecti on box must ent er a hol e i n t he mai n applianc e. This way t he c onnec tion box is properly mount ed.
Before the First Use
1. Using a suitable cleaning agent, remove anti-corrosive coating from all surfaces
of the appliance.
2. Before the first start-up, the following instructions must be executed.
Indications for the First Use of the Tilting Frying Pan with Steel Basin
1. Before the first use of the basin, it is necessary to fire it once. Proceed the
following way:
– start the appliance, as described in section 'Appliance Start-up';
– heat the appliance up;
– fill the basin with fat or oil;
– add slices of unpeeled potatoes;
– heat up everything in the basin until both potatoes and the bottom of the
basin become dark brown (almost black). Through such a heating up, a
layer of starch will be created.
NOTE: Dispose of the potatoes and the oil/fat!
The basin is fired for at least 10 minutes and smoke is generated in the process.
Smoke is generated only during firing and will not be emitted during subsequent use
of the appliance.
2. Following this, clean the basin with hot water and dry it thoroughly.
After firing, the basin's surface features similar properties as frying pans with non-
stick coatings, but at the same time it is not adapted to preparation of food without
fat or oil at all.
The non-stick effect will gain in force with time.
ATTENTION!
After each use, the basin must be wiped with kitchen paper towels only, if
necessary, with salt.
In exceptional cases, with stubborn soiling, a brush and hot water may be used for
cleaning, as usage of cleaning agents may damage the patina.
3. If the basin is not in use, gently rub oil into it, as otherwise rust may appear.
•
Setzen Sie di e Boden-Abdec kung in das Bec ken ei n. T he c over acts as a spac er bet ween t he heating element and l eft- over f ood tray.