- 6 -
Features
•
ideal for use in public washrooms, eg. in restaurants, hotels, airports, etc.;
•
dosage by infrared sensor;
•
non-cartridge liquid soap dosage system;
•
window as fill level indicator;
•
battery-operated by 4 (1.5V AA LR6) cells - not included!
Installation
•
Unpack the device and and remove all the packaging material.
•
Attach the soap dispenser close to a wash basin, so that it is within easy reach.
Fig. 2
10.
Screw M4x8
11.
Washer
12.
Wall mount
13.
Wall plug (2)
14.
Screws (2)
•
Unlock the soap tank cover (6) using the appropriate key (5) and open the soap tank
(Fig. 1).
•
Remove the wall mount (12) from the soap dispenser and mark the drill holes at the
desired height on the wall, based on the holes in the wall mount (Fig. 2).
•
Drill 2 holes in the wall and then insert the wall plugs (13) into the drilled holes. Fasten
the wall mount to the wall by means of the screws (14) and then hang the soap
dispenser on it. Make sure that the soap dispenser snaps onto the wall mount.
•
Tighten the screw (10) inside the tank by hand.