Bartscher 823HO, Instruction Manual

Page: 16 / 21

- 14 -
5.1.4 Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
•
Before connecting the appliance to the power supply, make sure that voltage and
frequency values on the rating plate are conforming to the characteristics of the
existing electric installation.
The allowable voltage deviation is ±10%.
•
Connect the appliance to an electric mains installation according to the international,
national, and local regulations in force.
•
The appliance must be connected to a potential equalization circuit (ground). The
clamp is located at the back of the appliance, next to the marking .
•
Position the appliance in such way that the plug is always easily accessible
for quick disconnecting when required.
•
Current circuit of the mains socket must feature at least 16 A protection. Only
connect the appliance directly to a wall socket; do not use any extension cords nor
power strips.
5.1.5
First Start-Up
Before
the first start-up electric appliances must be thoroughly inspected in order to
confirm the consistency of the appliance and its installation with regulations in force,
technical data, and recommendations for safety.
Carefully check the following:
→
temperature in the installation location must be higher than +4°C.
→ the chamber must be empty.
→
all packaging elements must be fully removed, including the protective
film on external walls.
→
do not block nor obstruct ventilation openings.
Execute a test run, without filling the appliance with food products. Follow indications
in section
5.2 'Indications for the User' .