Installation and operation
14 / 22
700183
EN
3. If necessary, level the appliance by
rotating the two height-adjustable feet
at the front bottom of the appliance
(Fig. 4):
– counter-clockwise, to raise the front
part of the appliance,
– clockwise, to lower the appliance.
Fig. 3
NOTE!
If the refrigerator is not installed horizontally, the door will not close
properly and the refrigeration compartment will not be airtight.
The door seal must provide a proper seal when the door is closed.
4. Remove adhesive tapes from the appliance.
Changing the Hinge Side
The hinges may be changed from right to left, as needed.
ATTENTION!
Before replacing the door hinges, set the temperature controller to OFF (0)
position and remove the power cord from the socket.
Do not place the appliance in horizontal position in order to change the
door's hinge side.
When replacing the door hinges, follow the instructions:
1. Tilt the appliance backwards (max. 45°) and support it well.
2. Unscrew the left-hand side front adjustable leg from the base.
3. Loosen the screws on the bottom of the appliance and remove the lower door
hinge.
4. Fit the lower door hinge on the opposite side and tighten with screws.
5. Attach the removed adjustable leg on the opposite side.
6. Place the appliance in upright position again.
7. Remove the door hinge cap at the top of the appliance.
8. Loosen the screws and remove the upper door hinge.
9. Place the upper door hinge on the opposite side and tighten with screws.
10. Re-fix the door hinge cap.
11. Ensure that the door is in the upright position and can be easily closed.
Summary of Contents for 700183
Page 1: ...46 700183 ...
