Installation and operation
700133
15 / 22
EN
Each wooden shelf may be removed to allow for, e.g., the storage of larger bottles.
1. First, take bottles off of the wooden shelf.
2. Then, lift the wooden shelf slightly and pull it out (loosen the screws prior,
should it be required).
NOTE!
Make sure that the wooden shelves are properly snapped before placing
bottles on them. Pay attention to uniform distribution of load inside the
appliance.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 12 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 15 minutes.
Summary of Contents for 700133
Page 1: ...2Z 40FL 700133...
