Installation and operation
14 / 22
110159
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2
Operation
Indications for User
• Fill the drawer chiller only when the digital display shows that the required
temperature has been reached.
• Place suitable bottled beverages in drawers; mind maximum load-bearing
capacity (4.1 'Technical Data').
• Do not put any warm beverages in the drawer chiller; first cool them to room
temperature.
• During the first filing or full filling of the appliance always open and fill only one
drawer to avoid tilting of the appliance.
• While filling the appliance keep in mind that sufficient space must be maintained
to assure free circulation of air inside the appliance.
• The more items in the appliance, and the longer the drawers are kept open, the
higher the energy consumption.
• To limit loss of cold air minimize the opening time of the drawers. Moreover, do
not open them too frequently.
Summary of Contents for 600S2
Page 1: ...600S2 110159...