Installation and operation
700811
13 / 24
EN
• Place the appliance so that sufficient air circulation is ensured. Leave 10 cm
clearance from walls and other objects.
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
• If the appliance is to be relocated, follow the instructions below:
– switch the appliance off;
– disconnect the plug from the socket;
– take out contents of the appliance;
– tape firmly all loose elements in the internal chamber and tape the door;
– the appliance may only be transported in vertical position.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
• Two front feet of the appliance may be adjusted through screwing in/out so that
the appliance stands stable.
HINWEI S
IMPORTANT!
The appliance is not suitable for built-in installation.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• If the appliance was stored or transported vertically, leave it standing
horizontally for 12 hours before it is connected to electric power.
• Following an electric power outage, wait at least 3 minutes before reconnecting
the appliance to prevent a damage to the compressor.
Summary of Contents for 302L WB
Page 1: ...302L WB 700811 ...
