Installation and operation
10 / 16
300306
EN
5
Installation and operation
5.1
Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•
Never
place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Install the appliance as far as possible from zones, where people are present.
• Do not place any easily flammable liquids, gases or any other flammable objects
near the appliance.
• In a room, place the appliance in an area, where insects converge, but not in
places, where draughts or wind may be present (windows, doors).
• Keep all electricity conducting materials away from the appliance. Never
(especially during operation) place in the appliance nor on the metal grid any
metal objects.
Summary of Contents for 300306
Page 1: ...IV 22 300306...
