Installation and operation
14 / 22
105827
EN
Flush-Mounted Installation
The appliance is designed to be installed in a worktop board. During installation,
follow these indications:
1. Select a worktop board that is heat resistant to avoid deformation due to the
heat radiation of the appliance.
2. Make sure that the thickness of the worktop board complies with the load
requirements and is at least 30 mm.
3. Cut an opening in the worktop board according to the figure below (Fig. 2).
Fig. 2
** Dimensions including machine feet 105827(105860)
Summary of Contents for 201TC
Page 1: ...201TC 351TC 105827 105860...