Installation and operation
406055
13 / 20
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2
Operation
Tips for the user
• To limit loss of cold air minimize the opening time of doors. Moreover, the sliding
doors should not be opened too often.
• Do not obstruct ventilation openings inside the refrigerated display. The air must
freely circulate to provide for cooling functionality.
• The food products stored in the appliance must be arranged in sufficient
distances between them. Insufficient distances hinder the cooling effect.
• Cool warm food products down to ambient temperature before placing them the
appliance.
• If possible, in the event of a sudden power failure, avoid opening sliding doors in
order to avoid loss of cool air.
Preparation of the appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section
6 “Cleaning”
.
2. To end with, dry the appliance and accessories thoroughly.
3. Place the shelves i the appliance.
4. Close the appliance door.
5. Plug the appliance into a suitable single socket.
6. Press the ON/OFF switch to
“I”
position, to switch the appliance on.
The green power indicator light in the ON/OFF switch lights up.
7. Place the prepared food products only after the appropriate cooling capacity has
been reached.
