Installation and operation
700121
17 / 25
EN
– switch the appliance off;
– disconnect the plug from the socket;
– take out contents of the appliance;
– tape firmly all loose elements in the internal chamber and tape the door;
– the appliance may only be transported in vertical position.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2
Operation
User instructions
• Shelves may be positioned at various heights. Arrange them adequately to the
size of beverage containers, so that the inner space of the appliance is used
optimally.
• Place beverage containers on shelves so that distances between them allow for
sufficient air circulation inside the appliance. Insufficient distances hinder the
cooling effect.
• During operation, the time of door opening should be as short as possible, so
that loss of cool air is minimised.
• If possible, in the event of a sudden power failure, avoid opening doors in order
to avoid loss of cool air.
Preparation of the appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section
6 “Cleaning”
.
2. Finally, dry the appliance and accessories thoroughly.
3. Place bearing rails bracket at a desired height and install shelves.
